[Unison-hackers] Synchronizing between Mac and Linux: Nothing shows up!

[Tim Adler]

Hey everybody,

I posted this issue to the unison-users already, but Alan pointed me  
to come here.

I'm successfully using Unison to synchronize two Macs (great tool btw,  
better than every
commercial stuff available). Today I tried for the first time to  
synchronize my webpage which
is on a 9.3 SUSE Linux server on the net.

I did the usual thing, copied unison to /usr/bin on the Linux machine  
and set up a profile on
my Mac pointing to my local and the remote directory (unison version  
is the same on both
sides 2.4.47). The comparison seems to go well, but
even when there is certainly something to synchronize between the both  
sides, the Mac GUI
only shows: "Check and/adjust selected actions; then press Go" but  
there is absolutely
nothing in the lower panel.

The Console gives me an error-message: "29.11.07 13:16:43 Unison[598]  
*** NSThread:
> ignoring exception '*** -[NSCFArray objectAtIndex:]: index (0)  
> beyond bounds (0)' that raised
> during thread perform of target 0x24b550 and selector 'afterUpdate:' "

When I use the text-only version, the synchronisation goes well!

Seems there is a problem with the Mac GUI!

Greets, Tim

BTW: Whenever I run the Mac GUI, there is the following error on the  
Konsole:
2007-11-30 00:03:41.495 Unison[1184:100b] *** _NSAutoreleaseNoPool():  
Object 0x20c7a0 of class NSThread autoreleased with no pool in place -  
just leaking
Stack: (0x9298827f 0x92895962 0x9289b3f4 0xa69d 0x25aa 0x2522 0x2449)
2007-11-30 00:03:41.518 Unison[1184:100b] Unknown class  
MessageProgressIndicator in Interface Builder file.